Details
- total no. of dies
- 8
- inlet wire Ø max
- 3,00 mm
- finished wire Ø min
- 0,80 mm
- block Ø
- 7 x 305 mm / 1 x 350 mm
- up to now used for
- Ni-Cr 800 N/mm²
- type of drive
- AC motors
- motor power
- 8 x 18,5 kW
- revolutions
- min-1
- total connected load
- 150 kW
- operation voltage
- 380 V
- frequency
- 50 Hz
- control voltage
- 220 V
- suitable for
-
- wire elongation
- %
- wire cross sectional reduction
- %
- inlet wire Ø min
- 2,60 mm
- finished wire Ø max
- 1,20 mm
- examples of production
-
- inlet tensile strength
- N/mm²
- finished wire tensile strength
- N/mm²
- number of blocks
- 8
- shaft of block
- vertical
- block revolutions
- min-1
- finishing block Ø
- 350 mm
- stripper basket
- yes
- die thickness
- mm
- die Ø
- mm
- no. of rotating die holders
-
- drawing force
- N
- speed
- m/s
- speed max
- 15 m/s
- cooling water requirement
- 75 m³/h
- mode of control
- dancer controlled
- capstan cooling
- water
- with electrical cabinet
- yes
- without electrical cabinet
-
- with pay-off
-
- with dancer
-
- mit descaler
-
- machine length
- mm
- machine width
- mm
- machine height
- mm
- machine weight
- kg
- Control unit
- conventional