Boring mills / Machining Centers / Drilling machines - Machining Center - Vertical - UNISIGN UNIVERS 6

Machining Center - Vertical

UNISIGN UNIVERS 6

Stock number:
1118-1562 
Year / Condition:
2006 
Control unit:
CNC (SINUMERIK 840 D)
Country of origin:
Netherland  
Freight basis:
ex location 
Item location:
ex location 
Delivery time:
appr. Feb/March 2019 

Picture / documents / videos

Technical specs

Details

x-travel:
3.000 mm
y-travel:
800 mm
z-travel:
600 mm
Size Clamping table 1:
850 x 1.500 mm
Size Clamping table 2:
850 x 1.200 mm
Table load max.:
1.000 kg
X-, Y- and Z-axis, stepless:
5 - 32.000 mm/min
Max. feed power X- and Y-axis:
10.000 N
Max. feed power Z-axis:
16.000 N
rapid in X / Y / Z:
32 m/min
power, S6 -60% ED:
26 kW
transmission ratio:
2 i = 1:4 
Speed, stepless:
30 - 6.000 1/min
Max. torque 40% ED:
650 Nm
tool taper:
SK 50 – DIN 69871 Form A 
spindle diameter in front bearing:
90 mm 6-fach gelagert  
Max. boring capacity:
Ø 100 mm in Stahl C45 
Max. Ø rigid tapping:
M 40 in Stahl C45 
Max. milling power 600 cm³/min:
in Stahl C45  
Tool places on travelling magazine:
52 Plätze  
Additional tool magazine:
83 Plätze  
Tool change time in spindle:
ca. 5  sec
Chip to chip time:
ca. 9  sec
Tool diam. max.:
180/120 mm Nebenpläzte frei/belegt  
Bridge tools:
max. 250 x 180  mm
Tool length max.:
400 mm
Tool weight max.:
15 kg
Floor space without swith cabinet:
ca. 8,0 x 4,5 m
Total Machine height:
ca. 4,5 m
weight of the machine ca.:
20 t
Total conneted load :
55 kVA
voltage:
400 V
operating frequency:
50 Hz

Description

CNC control:
SIEMENS SINUMERIK 840 D
Combined with digital drive control, hard disk storage,15“ TFT - color screen,
1 Gbyte hard disc, external machine control panel, QWERTY-full keyboard, standard drilling and milling cycles, threading without compensation chuck, lineare interpolation, circular interpolation, processing level swivel, helical curve etc. Siemens tool management for managing tools and tool magazine, program input while editing, spindle power display, electronical handheld terminal, USB-interface, UNISIGN diagnostic system.

Chip conveyor:
·Installed longitudinally below the table
·Ejection right
·Discharge high ca. 1.200 mm
Integrated coolant tank with lifting pump

Guides, drive and measuring systems:
·All axis drives with digital servomotors
·Direct measuring system for X- and Y-axis
·Z-axis with encoder measuring system
·X-, Y- and Z-axis with high-precision linear guides for maximum precision and dynamics
Steel covers of the X-axis with roller guide and prallelogram drive

coolant equipment:
· Cooling through spindle including paper band filter · Clean water tank ca. 450 l, 2 clean water pumps: · Normal coolant supply 40 l/min 4 bar · High pressure pump 40 bar · Monitoring the coolant pressure · Internal coolant through spindle centre taper DIN 69871 Form A · Clamping bolt DIN 69872

Complete enclosure, pendulum machining
When the doors are closed, the working space is completely closed. The automatic sliding doors allow loading by crane. Removable cover for pendulum machining.
Opening in the left sid panel 400 x 500 mm for insertion of long workpieces.

equipment
•Complete enclosure
•Radio touch probe manufacturer M&H
•Angle milling head incl. Pick Up Station
•Coolant equipment with 2 coolant circuits and internal coolant through spindle
•Chip conveyor
•Cooling unit for spindle
•Div. tool tapers SK 50

Contact seller

FLECKENSTEIN Werkzeugmaschinen GmbH

FLECKENSTEIN Werkzeugmaschinen GmbH

Sommerweg 1563831 Wiesen Phone: +49 (0)609697060Fax: +49 (0)6096970620 

 Google Maps

I agree that my personal data will be collected and processed to answer my request. Your data will be deleted after the processing of your request. Note: You can revoke your permission and have all of your data deleted by contacting this address: infouseteccom. Detailed information on handling personal data can be found in our data privacy policy

Further machines of this dealer